Custom made dummies

[Phil Redmond]

The dummy on the grass was made by a Canadian student but the stand was made buy Curtis George is Detroit
Curtis made the stands and dummies in the other pics. He makes half dummies. IMO you don't need the back of the dummy anyway except for the neck jut (jerk)
.He also made this dummy: http://www.youtube.com/watch?v=qJV3e5nsp5M
You can contact Curtis here: curtgeorge@wowway.com

[Phil Redmond]

You have to be careful with this or it'll pop you in the face.

[Sihing73]

You have to be careful with this or it'll pop you in the face.

Phil,

No doubt you speak from experience...................judging by your looks

Remember, when I come to Philly we duel from my old dummy!!!!!

I'll make sure I have room to take it back to Toccoa with me

[Phil Redmond]

Phil,

No doubt you speak from experience...................judging by your looks

At least I have an excuse . . .

Remember, when I come to Philly we duel from my old dummy!!!!! . . .

What dummy? ? ?

[Sihing73]

At least I have an excuse . . .



What dummy? ? ?

Hmmmm hard to say, the one I am conversing with on this forum on the one in the pic you sent me

[Phil Redmond]

Here's what Curtis wrote to me:
" . . . . .I only make mini mooks at this time. 56" tall or 36" tall with or without a leg. and each comes with its own stand.
And that they will need to pick it up. I don't want to bother with shipping. A 36" mini is $400.00
and a full mini (56" with a leg) is $500.00.
Also as a general rule of thumb, the less that I have to do the less that they will have to pay. I'm willing to work with people if they have the basic skills to finish off the work themselves.
Tell them everything is custom made to fit there own bodies.
So I need to get their measurements and a deposit to buy the materials."

[Sihing73]

Here's what Curtis wrote to me:
" . . . . .I only make mini mooks at this time. 56" tall or 36" tall with or without a leg. and each comes with its own stand.
And that they will need to pick it up. I don't want to bother with shipping. A 36" mini is $400.00
and a full mini (56" with a leg) is $500.00.
Also as a general rule of thumb, the less that I have to do the less that they will have to pay. I'm willing to work with people if they have the basic skills to finish off the work themselves.
Tell them everything is custom made to fit there own bodies.
So I need to get their measurements and a deposit to buy the materials."

Hey Phil,

If I want one I could have you pick it up when you go to Detroit, right? I figure you at least owe me that much

Although, if I got a 56" one it would be taller than you, wouldn't it?

[Phil Redmond]

Of course I would pick one up for you.

[KPM]

You have to be careful with this or it'll pop you in the face.

It looks rather phallic!

[Dr.Rob]

Sifu Redmond, your spring arm is quite ingenious. I tried to make one with the shaft exiting from the centre of a truck spring. Screwed to the wall with clips. But that works just as well.


http://wiki.kwoon.info/images/Final2.jpg

do lov this little number for my WC dummy...dummy is store bought. I am half way through making this stand. What to say is I got the wood

Blueprints.
http://wiki.kwoon.info/index.php/Tuto_MookJong

Our White Crane dummy...


http://www.kontactsports.com/img_tem...sports-com.jpg


And beautiful CLF dummy...



http://www.kontactsports.com/img_tem...sports-com.jpg

[Phil Redmond]

Sifu Redmond, your spring arm is quite ingenious. I tried to make one with the shaft exiting from the centre of a truck spring. Screwed to the wall with clips. But that works just as well.


http://wiki.kwoon.info/images/Final2.jpg

do lov this little number for my WC dummy...dummy is store bought. I am half way through making this stand. What to say is I got the wood

Blueprints.
http://wiki.kwoon.info/index.php/Tuto_MookJong

Our White Crane dummy...


http://www.kontactsports.com/img_tem...sports-com.jpg


And beautiful CLF dummy...



http://www.kontactsports.com/img_tem...sports-com.jpg

Tabernac!!!.... that's a nice dummy.
btw, I didn't make the spring arm. Curtis did.

[Phil Redmond]

It looks rather phallic!

I'm not touching that one Doc . . .

[Sihing73]

I'm not touching that one Doc . . .

Phil,

Why the change of heart? I'm sure you touched it before

[Phil Redmond]

Phil,

Why the change of heart? I'm sure you touched it before

Hey "moderator" young people read this forum........

[Sihing73]

Hey "moderator" young people read this forum........

Phil,

Such a dirty mind I was referring to the Spring Arm used in training, but if you have touched something else as well........please keep that to yourself.

I also would suggest thinking more about the smiley you select...........although it does suggest something